Archive for November, 2011

The Mailmum

You know this little online diary of ours is all about keeping you posted on the little stuff along with the big (and the bad and the ugly along with the good). So file this under small but good. Remember our little petunia-fied mailbox? Well, it went from this in June

…to this in August

…to this in October:

Womp- womppppp.

The petunias were annuals so they weren’t gonna last forever. And between rain washing out a lot of the mulch and the flowers thinning to a scraggly looking vine mess… yeah, it was ugly. But wait, we’ll get to the “good” in a minute.

Fortunately I was able to pull them out with virtually no effort. Note: Some of these pics were taken before we removed/transplanted a bunch of bushes here – you’ll see why we waited to post about this a few photos down)

We had actually just received a Home Depot coupon in the mail for “Buy 2 Mums, Get 1 Free” (we signed up for some free garden club a few years back so we get random coupons every once in a while). Sadly we didn’t get that coupon before purchasing our porch mums a few weeks back, but oh well – we decided to put it to good use in another place. The mailbox o’ tumbleweeds. So $14 later we had three sunny yellow mums out front. And yes, Sir Squirrel is chilling out right in the middle of them (more on him here).

Even though the mums are perennials, we’re so happy with how the petunias filled in the space over the summer that we’ll probably plop some of those back in come springtime (and just transplant these guys so we can enjoy them somewhere else). But we’re loving the autumn look for now.

What weren’t we loving? The washing out problem that we’d been battling after every big rain. See the weed blocking fabric that’s completely exposed next to the drainage grate on the right? In the words of my wife: reeeeal claaaassy.

The drain worked well most of the time, but heavy rains overload it and, well, you get the idea. So I borrowed some stones leftover from the patio project (they used to line those rows of liriope that we removed here) to build a little stacked stone wall beside the mum-bed. Things are looking up, right?

We have since had two big rains (we waited to post about it to be sure it wasn’t an epic fail) and we’re happy to report that it kept the water from whisking away the dirt with it. So… victory!

It doesn’t look half bad if you ask me. Although of course those mums could use some filling in, sort of like our petunias back when we planted those. Heck, now that we have the little stacked stone wall, maybe we’ll add more plants to really fill it up come spring. And hopefully we’ll straighten and paint the wooden mailbox post then too.

Did anyone else do any quick outdoor updates for fall? Were they mum related? Or stone related? Or ceramic squirrel related?

Oh and Sherry promised more pics of the feather wreath that some of you noticed from afar on the door in this post, so here we go. It’s just an old black feather wreath from JoAnn (picked up after last Halloween on super clearance- maybe it was $8?). Sherry lazily placed it over the door knocker (didn’t even bother hanging it) and called it a day. That’s my girl.

Sherry also meant to toss the three remaining black spiders that we had (from this post) into the yellow mums for more black-on-yellow action before snapping these pics but completely forgot. But she was sure to do that before those cute little trick or treaters came a-knocking yesterday evening. The ones who noticed seemed to love spiders as much as Clara (more on that here). So yeah. Good times going on at the mailbox and the front door. Although we could definitely use a new doormat (or at least a new stenciled paint job over our current one). How about you?

Psst- You can check out how we painted our front door yellow here and ORBed the handle & doorknocker here.



How To Build In Your Fridge With A Cabinet On Top

We learned with our first kitchen that building in your fridge is a huge help in making a kitchen look fancy schmancy. And at the moment our floating fridge was looking pretty much the exact opposite.

That’s where an also less than schmancy $19 cabinet from the Habitat For Humanity ReStore (mentioned yesterday) came in handy. It’s 12″ tall and 36″ wide, the exact width of our fridge. And when you take off the don’t-match doors (we’re hoping to retrofit extra existing doors to make it seamlessly match the other cabinets later), it starts to look more like a workable piece of cabinetry to sit atop our refrigerator.

For the sides of our built-in fridge, I picked up two 4′ x 8′ pieces of plywood that the Lowe’s guy recommended for cabinet work (he said it’s the same stuff they sell folks who get theirs built-in by pros as part of their kitchen installation process). They even cut it to size for me right in the wood cutting area, which was a huge help. The planks were still too big for our Altima so I rented the $19 Lowe’s truck to get it home. The truck rental, fridge planks, plus a few 1 x 2″ pieces of pine trim brought my grand total to about $90. Good thing that ReStore cabinet was cheap ($19).

The point of the trim pine was to make the front edge look more finished and a bit more substantial looking. So I broke out my trusty Kreg jig and drilled a bunch of holes down one edge of both plywood pieces.

With my holes drilled, I sanded both sides of the plywood to make sure they were smooth. And while I was at it I sanded the finish off the front of the cabinet so it’s primer/paint ready (we’ll tackle it when we tackle the rest of our existing cabinets after the counters get installed so nothing gets chipped or scratched off during that stage).

Then I carefully clamped and screwed the pine trim to the plywood piece so that the edges were flush. Having been around block with my Kreg by now, I’ve learned that it’s sometimes helpful to drill a second hole just to put the special Kreg clamp into. This is me trying to think ahead.

Eventually (note that I didn’t say “soon” – this part took me about an hour) I had the trim attached just the way I wanted on both pieces of plywood.

Attaching the cabinet took some thinking ahead too. Since we wanted the cabinet to sit flush with the trim (not behind it) and needed the opening to be slightly wider than our fridge (which was the same width as the cabinet) – I had to add some filler pieces (aka, leftover scraps). One stack of scrap wood went up at the front of the cabinet and the other was located at the back (neither of which would be seen at all once it was all installed).

Here’s the same view with the cabinet sitting on it, to give you a better idea of why the filler was needed (I ended up adding a wooden shim to make sure the cabinet sat 100% straight).

We didn’t actually attach the cabinet until we got everything back inside, since I wasn’t about to try to maneuver this whole thing from my patio-workspace through a few doors and into the kitchen. So here we are in the kitchen, with the cabinet screwed to one of the plywood sides. Here’s where Sherry put Clara down for a nap and came in to help.

We brought in the second side and used our camera tripod as makeshift jack to hold it in place while we screwed it all together, checking and double checking that everything was square and level.

Before standing it up we added a spare board across the back to help keep everything straight and supported from front to back. It’s also the board we later drilled through to screw the whole thing into the wall (didn’t want it falling over on anyone!). We also put a similar plank of wood across the bottom (again to keep things square and to allow us to screw the whole piece into the wall).

Then we heave-ho’d it up to a nice standing position…

… and slid it into place (after temporarily removing the bottom support slat so we could slide it over the fridge like a slipcover).

We’re not saying “ta-da!” quite yet, since there’s still lots to be done to it. Like priming and painting it, priming and painting the paneling behind it, adding matching doors, adding molding around the top, adding trim around the bottom, etc. But for now, we’re enjoying one pretty noticeable step towards making the kitchen look a lot more pulled together.

It’s definitely an upgrade from the un-built-in version, right?

Oh and if you scroll back up to the built-in pic above this one, you’ll notice that the fridge sticks out just a smidge from the wooden sides. That’s just a functional thing (it can slide a bit farther in, but the doors wouldn’t open as wide as we needed them to in order to access certain slide-out fridge drawers without hitting the wood frame). But it’s nice because the new built-in sides block all of the black coloring on both sides of the fridge – so all that’s visible is the stainless front (and a smidge of the sides of the doors – which are still stainless). It’s definitely going to be a huge upgrade to have a custom looking fridge setup along with the flush front cabinet up top (our old above-fridge cabinet was set about 6″ back, so it was a lot harder to access).

So that’s the latest slow but steady kitchen progress. Next on the agenda is attempting to finalize the placement of the peninsula (we still need one more cabinet to complete that area) by the end of this week so that we can finalize the placement of the giant eight foot doorway to the dining room that we’ll be adding with the help of a pro (which we hope to begin sometime next week!). Is it next week yet? Should be interesting/scary/exciting/dusty. As always, we’ll keep you posted!

Psst- We’re over on BabyCenter sharing an update on how we organize and store Clara’s outgrown clothes. And we’d love to hear your storage secrets on the subject.